The following warnings occurred:

Warning [2] Creating default object from empty value - Line: 11 - File: inc/plugins/tapatalk.php PHP 7.4.10 (Linux) File Line Function /inc/plugins/tapatalk.php 11 errorHandler->error /inc/class_plugins.php 38 require_once /inc/init.php 233 pluginSystem->load /global.php 18 require_once /printthread.php 16 require_once

Hi from Scotland - Printable Version +- RebelDroids.net (http://www.rebeldroids.net/forum) +-- Forum: Welcome to rebel droids! (http://www.rebeldroids.net/forum/forumdisplay.php?fid=3) +--- Forum: Introductions (http://www.rebeldroids.net/forum/forumdisplay.php?fid=5) +--- Thread: Hi from Scotland (/showthread.php?tid=317)

Hi from Scotland - Envisaged - 03-03-2017 Hello everyone, my name is Gareth and I'm addicted to building droids. When I saw BB-8 in the trailer for TFA I knew I had to attempt to build one. I had originally started building the full scale one from The BB-8 builders club in early January last year when the call for droids for SWCE was put out and specifically BB-8 units. I described I would take on the challenge of making a ½ scale one in time and got started on it around six weeks before Celebration. I made it just in time as I was still painting the last panel the day before getting on the train to London. Unfortunately it was purely static with no lights or anything else, although I had built in a charging port. He made his second appearance at the largest 3D printing show in the U.K. The TCT show in Birmingham in late September where he took a fall and cracked his dome. By the time this had arrived I had managed to get lights in his dome. Pics from Celebration and TCT show. Also some of my full scale build. RE: Hi from Scotland - savagecreature - 03-03-2017 Welcome to the group, Gareth! Nice job on the BB 8. I see from the sign that he's PLA, but he's got a very smooth, finished, look to him. I would love to hear the process you used to finish the surface after printing. I look forward to seeing your next build Hi from Scotland - Envisaged - 03-03-2017 Hi Savagecreature, plain old elbow grease and lots of sanding starting on 80grit paper until I can't see any layer lines, moving papers up to 200, 400, 600 and finally wet sanding with 1200. Once finished sanding I use a filler primer, the orange / beige colour on the panels of the full sized one. Then a couple of coats of automotive paint to finish off. RE: Hi from Scotland - Dyne - 03-03-2017 Welcome to the funhouse RE: Hi from Scotland - kresty - 03-07-2017 Gareth, did you see the pix of Lego BB-8/Mouse after Celebration?  We ran around Scotland a bit afterward - they're at the end of our Flickr album Hi from Scotland - Envisaged - 03-10-2017 Hi Kresty, Just been to take a look, I'm from Dundee well originally N.Wales some great pictures you have got there, I'm particularly fond of the one of Borgè protecting my half scale from the Jawas. ;o) RE: Hi from Scotland - kresty - 03-10-2017 Yea, you gotta watch those Jawas!