Monster Sienna Mouse Droid?
|
|
|
1 views
|
|
Priming the chips on their rails1 viewsHopefully the latex will keep the final spraypaint from eating away the foam....
|
|
Hmm, broken pipe0 viewsGot tripped over in the middle of the night
|
|
Cutting Pipes for Top Greeblies0 views
|
|
Cutting Pipes for Top Greeblies0 views
|
|
Cutting Pipes for Top Greeblies0 views
|
|
"DROIDS"0 viewsNew license plate for the monster gigantic mouse droid.
|
|
Standoffs for Front Greeblies0 viewsThe front ones have to be 1/2" taller as the roof rack rails are shorter at the front of the car (so the bottom greeblies would hit the roof).
|
|
Inferno's helping us find the best "chips" for the droid sides0 views
|
|
Gluing Chips0 views
|
|
Lara Gluing Chips0 viewsEach "chip" is 4"x16" of the 2" foam.
|
|
Chips cut from foam.0 viewsPower saw with 2" foam = stupid danger. I presume it tries to melt on the blade, which then tries to throw it all over the place. Hopefully enough are "ok" that we'll have 48 usable ones.
|
|
End greeblie round caps printed0 viewsThe 3D model's end details had round tops, so I printed some. Holes to allow water to dry.
|
|
Printed a few things for the top greeblies0 viewsThis cap is 2 parts so I don't have to use supports to print (center post is separate). Holes in the cap so if it rains it has a chance of drying.
|
|
Straps and hardware for attaching side bits0 viewsWe're planning on using the clips to attach the straps to the doors. The buckle fittings are to tighten the straps and adjust the position of the "chip" greeblie rails.
|
|
Cutting details on the laser0 views
|
|
Cutting details on the laser0 views
|
|
Cutting details on the laser0 views
|
|
Laser parts and masks0 views
|
|
Stencils for masking part locations0 views
|
|
Laser parts0 views
|
|
Some caps for the big pipes0 viewsA few little details were printed
|
|
Masking part locations for upper greeblies0 views
|
|
Masking part locations for upper greeblies0 views
|
|
Masking part locations for upper greeblies0 views
|
|
Masking part locations for upper greeblies0 views
|
|
Testing Side Greeble Fit0 viewsYea, it needs a bath, but we went ahead and strapped on the side greeblies today.
|
|
Lara Painted More Parts!!!0 viewsGetting there...
|
|
Rough draft of top greeblies (rear)0 views
|
|
Blocks to fit Sienna Roof Rack Rails0 views
|
|
Blocks to fit Sienna Roof Rack Rails0 views
|
|
Blocks to fit Sienna Roof Rack Rails0 views
|
|
Shock Cord Mount (Rear Greeblies)0 views
|
|
Shock Cord Mount (Rear Greeblies)0 views
|
|
3 views
|
|
Experimenting with numbers of chips on sides0 viewsLast night couldn't sleep and started counting chips..... Thinking that maybe 7 row (5 of 4 and 2 of 2) might be too many.
So... mocked up 4 top rows and 3 top rows to see what it might look like.
|
|
Rough draft of greeblies (side)0 views
|
|
Testing Roof Rack profile fit0 views
|
|
Top Greeblies Progress0 viewsUpper part of the top greeblies glued together
|
|
Check fit of Top Greebies0 views
|
|
Check fit of Top Greebies0 views
|
|
Check fit of Top Greebies0 views
|
|
Check fit of Top Greebies0 views
|
|
Bottom side of upper Greeblies0 views
|
|
Inferno likes to help0 viewsOf course Inferno doesn't want to feel left out.
|
|
Spraying a little bit0 views
|
|
The Funny Colored Block0 views
|
|
|
|
|
|