SearchAirplane RC

Back to R/C Basics

Mode 2 Channel settings

Different transmitters & modes have different settings for the channels. You can experiment by plugging a servo into the RX (Receiver) and moving the sticks on the (TX) transmitter until the servo moves.

Different Transmitters may have different channel assignments, but these are Mode 2 assignments for the Turnigy. Different modes can be selected in the Stick Set page of the Model Select menu. Some transmitters also let you remap these things.

Channel	Stick	Aircraft Usage
1	Right stick left/right	Ailerons
2	Right stick forward/back	Elevators
3	Left stick forward/back	Throttle
4	Left stick left/right	Rudder